How to Close Your Pool Without Draining Water

As the warm weather comes to an end, so nears the end of swimming season, and it becomes time to close your pool and prepare it for winter—and the dreaded draining. But, what if you could close your pool without draining water? Here’s what you should know about preparing your pool for winter without draining it!

Let’s face it, your pool and the various pieces of equipment needed to run and maintain it can be expensive! Without taking the necessary steps before winter arrives, you could be facing some costly repairs and replacements in the spring before you can enjoy your pool once again. To help you along the way, here are some super simple steps you can take for a stress-free, easy pool closing. Here’s what you’ll need:

  • Winterizing Chemical Kit
  • Pool Shock
  • Skimmer Cover Plate
  • Return Fitting Winter Plug
  • Air Pillow
  • Winter Pool Cover

A winter cover pump is generally recommended. This helps to keep the excess water from collecting on the cover during winter. If water accumulates it can stress or tear your pool cover and cause even more damages to your pool.

Man diving into swimming pool

Steps to Close Your Pool Without Draining

Preparing for Closing

One week before closing, you’ll want to add a phosphate remover to your water. This will prevent algae from making a home in your pool. You’ll also want to give your pool a thorough cleaning. Be sure to brush and vacuum your pool to prevent algae growth and make opening your pool in the spring even easier.

Water Management

If you live in a region with freezing temperatures, you should lower your water level to 4-6 inches below your in-wall-skimmer. For those in non-freezing regions, your water level should be nearly overflowing and kept filled right to the top.


Using a testing kit, measure your water chemistry. Your alkalinity should range between 80-120 ppm and your pH levels should be no higher than 7.6 and no lower than 7.4.


To get rid of any lingering bacteria, it’s important to chlorinate and shock your pool before closing. This will ensure your spring opening goes smoothly.

Filters and Air Lines

To make sure your pool equipment endures the winter season, it’s important to backwash your filter and drain all your pool lines. In freezing regions, add antifreeze to your pool lines to prevent ice damage.

Cover Your Pool

Once you have prepared your pool for closing, it’s time to cover it. You can use a safety cover, a leaf net, or preferably a winter cover. To prevent water accumulation on the top of your pool cover, inflate an air pillow and place in the center of the pool before covering.

During the winter season, you’ll want to routinely check your water chemistry each month with a simple testing kit to ensure your chemical balance is ideal.

With these simple steps, you can enjoy a stress-free pool closing without draining, and an even easier spring opening.

Posted on

How Much Will It Cost To Remodel a Pool?

When installing a new pool, very few people actually consider the cost to remodel a pool. That’s because companies that build and install pools like to make the potential owners think that the whole is going to last for decades.  While this CAN be true, it has a lot of variants.  It also depends on how well you take care of it, how well the pool is built, where you live, what materials were used, etc.

If you want to give your pool a nice facelift with a remodel, the cost to remodel a pool can be much higher….but it might be worth it if:

  • You plan to sell your home
  • You want to create a new look
  • You want to “upgrade” and update the materials used
  •  It needs a new system

What Is a Typical Cost To Remodel a Pool?

When it comes to remodeling a swimming pool, there are a lot of different options available to you, but here is a list of the most common changes.

Deck Resurfacing:  This can be as simple as repairing cracks and stains in the deck, or it can be a little more complex such as installing a brand new material.

For example, instead of concrete, you can resurface it to travertine – it’s more expensive, but its the most used stone for pool.

Concrete usually costs around $5000 to $10,000.  Once you start to get into stone decking, this can cost more.

New Filter:  A new filter and pump might cost you around $500 to $1500.

Change Of Pool Depth:  If you have a shallow pool you want to make deeper or a deeper pool you want to turn into a lap pool, this is also an option, but it’ll cost you!  This is between $10,000 and $50,000.  Likewise, you can also change the shape and size of the pool as well which will be configured into the price.

Addition or Removal Of Pool Slide/Diving Board:  If you want to add a slide or a diving board or you want to remove them this will cost around $1000.  But, you can also do this on your own if you find a guide to help you.

Addition of Water Features:  If you want to add bubblers, scuppers or even a waterfall, this is also possible with a pool remodel.  A typical waterfall runs around $7000 to $10,000, but a more intricate design could cost upwards to $30,000.

Adding A Swimming Pool Fence:  if you have a pool but you also have kids or live in a neighborhood with kids, getting a pool fence is going to be beneficial, unfortunately, it will also cost you money.  The average pool fence costs around $15 to $19 per linear foot.  Gates will also cost you an extra $325.00 each. The average cost of a fence with a gate will cost you around $1,125.00, but you do need both.

Hot Tub Expansion:  You can also add a hot tub or spa to your pool.   This is a popular option and the cost to remodel a pool could come in around $5000 to $10,000 if you decide to go this route.  Once you start adding on features or make it bigger than average, the price will start going up.

pool slide

All Factors Considered

In the end, you’re looking at around $35,000 to $62,000 depending on the features you choose from above, how big the pool is, and of course, where you live.  Beyond the features of a pool, you also need to consider taxes and maintaining the pool as well.

Maintaining a pool isn’t cheap, but it might be a necessary evil if you don’t want to do all the work yourself.  If you plan on getting a new pool or remodeling an old one, make sure you’re aware of all the costs, both obvious and unforeseen costs.

Posted on

What Is The Cost of Maintaining a Pool?

If owning a pool has always seemed like a fun, you should know that maintaining a pool can be less rewarding and prestigious, and it does come down to a bit of work.

Most of the time the “services” that need to be done for a pool can be done by the homeowner, but in other cases, you will have to hire a professional for the job at hand.

Pool Maintenance

Maintaining a pool is not optional.  This is something you will have to do, otherwise, your pool will become stagnant and it will attract algae, mosquitos, and other health issues.

Plus, a scummy looking mosquito filled pool is not attractive!  It’s important to keep a schedule for things like:

Skimming – This needs to be done weekly and costs anywhere between $100 to $200 a month.

Vacuuming – This needs to be done on opening and closing the pool and will cost around $600 a month.

Brushing – Brushing will need to also be done 1x a week and costs $100 to $200, but usually, its combined with skimming

Cleaning and changing of filters – This will need to be done monthly and costs around $100 to $200 a month.

Pool heater maintenance – Checking on the pool heater and adjusting the pool maintenancetemperature will also need to be done daily and will cost between $75 a $250 a month for an electric heat pump.

This price includes both the service of checking and adjusting, as well as how much the electricity bill will be.

Water level – This will require $30 to $60 a year in water costs.

Maintaining the PH of the water – This is something you can do on your own or hire someone, it doesn’t take a lot of ingenuity to check and maintain the PH, but it does cost about $80 a month in test kits and chemicals.

Winterizing – Winterizing involves draining the pipes and getting it ready for colder weather – this will cost $150.

Reopening – This involves making sure it’s ready for the new season and costs around $150.

Keep working at it!

If this seems like a lot of work, it is!  This is why a lot of people tend to do the easy things on their own and then hire someone to do all of the hard work for them.

Not only the hard work but a pool service company will set a schedule and stick with it; it’s their job to keep your pool maintained.

Most of the time when you hire a pool maintenance company it will cost anywhere between $75 to $100 an hour – but of course, this also depends on how big your pool is and your location.

You can also maintain it yourself, in which case you will need a skimmer for $10, a vacuum for $600, a brush for $30 plus you will need to buy all the chemicals and products yourself and take a crash course on owning and maintaining a pool.

clean pool water

It comes down to money, to be honest.  If you want a pool and don’t mind the hard work, then a hefty investment isn’t needed.  If you don’t want to do the work and want to reap the benefits; hire a company to do it for you.

Beyond all the work you have to do for the pool, there are also some chemicals you will have to handle.  For some people, it’s not the work of a pool that scares them into hiring a company, it’s having to deal with chemicals and the preparation of the pool for the year.

If you’ve never done this before this can seem like a nerve-wracking situation having to deal with Algaecide, Chlorine, Bromine, etc.

Posted on

The Best Way to Clean a Pool Without Chlorine

Chlorine is one of the most common pool cleaners in the world. It can keep the pool tiles clean and grout free whilst sanitizing the water and making it safer for everyone who takes a dip.

However, there is a price to pay especially if there is too much chlorine in your pool water. If you are allergic to chlorine or just focused on running a chlorine-free pool, you’ll be better off knowing what happens when you skip chlorine and what your alternatives should do.

What Does Chlorine Do in Your Pool?

Chlorine has four main responsibilities in your swimming pool water:

  • It sanitizes the water
  • It is an algicide
  • It is an oxidizer
  • It can hold residual value in water

Since chlorine is the safest chemical that can meet all these criteria, it is one most comprehensive all-in-one cleaner. Any alternative will have to address these four issues perfectly in order to keep your pool safe and good looking.

Any stagnant water that isn’t sanitized or oxidized will become a breeding place for risky bacteria and microorganisms. You will no longer have a clear pool that you can enjoy. Instead, your once beautiful pool will turn into a health hazard.

Ozone Pool Purification

This is one of the most effective FDA endorsed water purification method. Ozone is a very powerful oxidant that will destroy microorganisms and prevent deposits from accumulating in pipes or on your swimming pool’s tiles.

Since the system uses a UV bulb or corona discharge system to infuse the water with the ozone, there are no chemicals involved hence making the water as natural as possible once you are done with the purification process.

The only problem with ozone is it has a 20 to 60-minute lifespan depending on pool water temperature. This means that your pool water must be constantly infused with ozone to keep it safe for swimming at all times. This could be a bit costly.

Ultraviolet Pool Sanitizing Light

UV light is a powerful beam that can kill or inactivate any microorganism by denaturing its DNA. The specific UV used in this case would be short wavelength UV (UV-C.) Since the UV is also harmful to humans, the cleaning must take place in an enclosed chamber.

This means that the water must be pumped through the sanitization chamber continuously to keep treating it hence creating a healthy swimming pool. The procedure works perfectly regardless of the water temperature and the constant circulation is bound to keep your water healthy and fresh at all times.

Using Plants and Natural Chemicals

Going all natural and planting plants around and near the pool can absorb carbon dioxide and other contaminating chemicals. Couple this with natural pool products that kill microbes and small organisms and you will have a healthy pool that looks all natural.

If you want to walk this path, you have to be willing to let go of the convention sparkly white or blue pool and get used to water lilies, reeds, and irises in your pool.

There are alternative ways to keep your swimming pool clean without using chlorine. The best chemical based alternative would be to use bromine. If you don’t want any chemicals added to your water, you will have to invest in an active system that uses ozone or ultraviolet light to constantly sanitize water before sending it back into your swimming pool. Either way, you will need to work hand in hand with a professional pool maintenance contractor to choose the best option for your pool.

Posted on

Everything on Pool Screen Enclosures And What To Avoid

Having a pool is a great asset to any home or public space. Unfortunately, it can often be a source of frustration when debris or bugs get inside the water.

That’s why many people opt for screen enclosures. It can be overwhelming to pick one at first, given the number of parts that go into building it.

Generally, though, you can get a fairly good deal and quality if you stick to the following guidelines:

Strong Beam

Beams for pool enclosures are typically made out of aluminum, with companies using the same material all around.

  • You can get them in white, bronze, or black.
  • 6063-alloy strength can be the budget-friendly option but you want to opt for 6005-alloy strength to ensure your enclosure lasts a long time. Make sure to ask before you buy.

Beam Connection

Beam knuckles with internal gusset plates are what is generally used to connect these large aluminum beams to one another.

  • Don’t overlap your beams. That’s a cheap option that many companies will try to use.
  • It looks chunky, and is not as foundationally sound as having them attached on the side.
  • Be sure to ask for 5052-H32 alloy gusset plates.


Fasteners are large-screw like pieces of metal that hold the enclosure together, and arguably the most important part.

  • Don’t get talked into cheap zinc or low-grade stainless steel, as you will spend more money replacing them when they rust.
  • Go for the 18/8 stainless steel.
  • Pro-Tect or Nylo-Tec fasteners have a 10-year warranty and protect against the elements.

Phifer Screen

  • This brand of screen is the highest quality.
  • It lasts around 10-12 years, and has the thickness to protect your pool from unwanted bugs, the sun, or any storms that come in your area.
  • They make strong woven fiberglass screens, as well as aluminum and fiberglass.

Mesh Count

The mesh count on your screen indicates how to spread out you want it to be. The numbers indicate how many openings you want per inch.

  • For instance, an 8×8 mesh count will generally have 8 openings for every 8 inches. This is the standard size for a screen.
  • You can also opt for a higher mesh count (such as 20 x 20) if you want more light and air to come through.

Avoid Non-US Manufactured Screens

Many companies will sell standard screens that are cheaper in price, because they have been imported from China.

  • This costs much less to produce.
  • However, the resulting screens are very low quality.
  • Although these screens look similar, they can often start to break apart within a couple of years.

These are only a few of the options available for those looking at pool screen enclosures. As you can see, the quality certainly counts, and buying a pool screen that is higher in quality is an investment that can last for many years to come.

Posted on

How To Easily Finance Your Above Ground Pool With Bad Credit

Need a pool but have a poor credit score? Do not lose all hope; because getting your household a pool even with your financial situation is still possible. Having a bad credit score should not mean that you should cut yourself from the happy moments in life. But you should first figure out how to easily go about the entire financial process.

Why above ground pools are better

Deciding to go for an above ground pool is a smart choice, especially when you have bad credit. As compared to in-ground swimming pools, above ground pools are less expensive to build. Inground pools will require more labor and more costly materials.

On the other hand, your pockets will bleed a little less when it comes to digging the hole for your above ground pool to eventually putting a pool liner.

However, this is not to say that all above ground pools are cheap; there are high-end pools that will cost you more thousands of dollars. Moreover, if you do not properly finance the pool installation you will only end up with bad work, which will then mean more money to patch up faulty areas.

Why you shouldn’t give up on your dream

  • A swimming pool in your home will offer you leisure and recreation on your own terms and time.
  • Swimming as a family will increase harmony and create beautiful memories of quality time spent together.
  • The swimming pool will be a good investment that will increase the worth of your entire home investment.
  • You can still get financing for a pool even if you have poor credit.

So how do you finance the pool?

Approach your bank

Banks are the one place that put a lot of weight on customers’ credit scores. And especially if you are applying for a loan, your credit situation will highly determine whether you will qualify for the loan.

However, do not rule out this option just yet; approach your bank and see if they can provide you with a home improvement loan. You might just get lucky. Plus, even if you fail to get the loan, the bank might offer you other helpful ideas.

Only go for the best terms

Besides your bank, there are several other places you can acquire financing for your pool. Places that will offer you better terms or are more lenient. Therefore, carry a bit of research on other finance sources then do some comparison. Your bank might just turn out not to be the best offer.

Consider a private lender

It is a tough task trying to get a loan with a poor credit score. So it is possible that your efforts with the bank, pool companies, and other financial organizations will fail to bear fruits.

You then need to consider approaching a private lender. Look around and see if you can find one willing to work with your current financial status.

Work to improve your credit score

Frequent loan applications, and especially with a bad credit score will only make the score worse. You could, therefore, decide to briefly pause your pursuit for a pool, at least until the score is back up.

In the meantime, strive to pay your bills on time as well as your current debts, and avoid using credit cards often.

Do not rush to install the swimming pool if the process is only going to put you into deeper financial trouble. If you can’t get a good loan offer at the moment, it makes a lot more sense to work on your credit score first.

Posted on